项目概况:
【★项目概况】 本次含砂分析仪规格数量估算未来三年所需数量，未来三年考虑20个中心和40个井口平台，产品的规格尽可能覆盖常规项目需求。原年度供货协议即将到期，按计划推进新协议招标工作。 此次招标签署单价协议。 The specifications and quantities of sand monitors are estimated to be required in the next three years. In the next three years, 20 centers and 40 wellhead platforms will be considered, and the specifications of products will cover the requirements of conventional projects as far as possible.The original annual supply agreement is about to expire, and the bidding work of the new agreement will be promoted as planned.The tender signed a unit price agreement. 【★主要技术规格】 含砂分析仪品类购置。主要技术规格：分析仪的测量原理应为声学原理，分析仪测量方式应为非侵入式连续测量，分析仪砂粒检出限满足：油：25 μm，气：15μm；分析仪最小出砂率/分辨率满足：0.01g/s等。 Sand Monitor. Main technical specifications: the measurement principle of the monitor shall be acoustic principle, the measurement mode of the monitor shall be non-invasive continuous measurement, the sand detection limit of the monitor meets: oil: 25 μm, gas: 15 μm; the minimum sand production rate/resolution of the monitor meets: 0.01 g/s, etc.
投标人资质要求:
【★资格条件】 一、资格要求： 1、营业执照： 投标人具有合法有效的企业法人营业执照、税务登记证及组织机构代码证或证照合一的营业执照，投标时需提供原件扫描件（原件备查）。****点击查看事业单位的，****点击查看事业单位法人证书，投标时需提供原件扫描件（原件备查）。****点击查看公司的，提供具有合法有效的营业执照和上级法人单位****点击查看公司投标），****点击查看公司和上级法人单位的资质、资格和业绩，不认可同一上级****点击查看公司的资质、资格和业绩，投标时需提供原件扫描件（原件备查）。分公司与上级法人单位只可一家参与投标，同时参与投标的，投标均无效。 如果投标****点击查看公司，****点击查看公司登记注册证明。 2、制造商要求： 投标人应为本次投标产品的制造商。本次招标不接受代理商、贸易商投标。投标人以自己制造的货物参与投标的，不能再将此货物同时授权给其他投标人参与投标，否则相关的所有投标将被拒绝。本次接受所投货物的****点击查看公司****点击查看公司，以及接受所****点击查看公司参与投标，此类公司视同为制造商，投标时需提供相应的证明文件。同一制造商仅允许一家投标人参与投标，否则相关的所有投标将被否决。投标时提供符合要求的证明投标人为制造商证明相关材料，材料要求详见格式 IV-15制造商证明相关材料。 3、关联关系要求： 如出现不同投标人的负责人为同一人或存在控股、管理关系的情况，相关投标均无效，招标人随时有权做出拒绝投标、取消投标资格、取消授标、不签订合同或在合同签订后终止合同等决定，相关投标人须无条件接受，且由此做出的任何损失由对应投标人承担。 4、体系认证要求： 投标人所投产品的制造商投标时需提供合格有效的GB/T19001（ISO9001）质量体系认证证书（认证范围应包含生产或制造），并可在中国****点击查看管理委员会网站(http://www.****点击查看.cn/)核实。如果有国家相关部门发布的最新体系标准，以最新体系标准为准。投标时需提供原件扫描件（原件备查）。注：如所投货物的制造商提供的质量体系认证证书是非中国的第三方认证机构颁发的，则网站查询不适用。 Qualification Requirements(Performance track record will be released to all bidders during bid opening): 1.Business license:The bidder has a legal and valid business license of enterprise legal person, tax registration certificate and organization code certificate or a business license with one certificate, and shall provide a scanned copy of the original (original for future reference) when bidding.If the bidder is a public institution, it shall have a legal and valid certificate of legal person of the public institution, and shall provide a scanned copy of the original (original for future reference) when bidding.If the bidder is a branch company, it shall provide a legal and valid business license and a letter of authorization from the superior legal entity (authorizing the branch company to bid), recognize the qualifications, qualifications and performance of the branch company and the superior legal entity, and not recognize the qualifications, qualifications and performance of other branches of the same superior legal entity. The original scanned copy (original for future reference) shall be provided when bidding.Only one of the branch and the superior legal entity can participate in the bidding, and the bidding will be invalid if they participate in the bidding at the same time.If the bidder is a company registered outside China, it shall provide a valid certificate of company registration. 2. Manufacturer"s requirements:The Bidder shall be the manufacturer of the bidding products.This tender does not accept bids from agents and traders.If the bidder participates in the bidding with the goods manufactured by itself, it shall not authorize the goods to other bidders to participate in the bidding at the same time, otherwise all related bids will be rejected.The wholly-owned sales company or holding sales company of the manufacturer accepting the bidding goods, as well as the parent company of the manufacturer accepting the bidding goods, shall participate in the bidding, and such companies shall be regarded as manufacturers, and the corresponding supporting documents shall be provided when bidding.Only one bidder from the same manufacturer is allowed to participate in the bidding, otherwise all related bids will be rejected.The Bidder shall provide relevant materials for the manufacturer"s certificate when submitting the bid. See Form IV-15 for relevant materials for the manufacturer"s certificate. 3. Requirements for association:If the principals of different bidders are the same person or there is a holding or management relationship, the relevant bids shall be invalid, and the tenderee shall have the right to make decisions at any time, such as refusing to bid, canceling the bidding qualification, canceling the award of contract, not signing the contract or terminating the contract after signing the contract, and the relevant bidders shall unconditionally accept them, and any losses arising therefrom shall be borne by the corresponding bidders. 4. System certification requirements:The manufacturer of the products submitted by the bidder shall provide the qualified and valid GB/T19001 (ISO9001) quality system certification (the certification scope shall include production or manufacturing), which can be verified on the website of Certification and Accreditation Administration of the People"s Republic of China (http://www.****点击查看.cn/).If there is the latest system standard issued by the relevant national departments, the latest system standard shall prevail.A scanned copy of the original shall be provided at the time of bidding (original for future reference).Note: If the quality system certificate provided by the manufacturer of the goods is issued by a non-Chinese third-party certification body, the website inquiry is not applicable.
联系人632个
可引荐人脉543人
历史招中标信息27053条
